Burying the wires in “Underground Fence Systems” is still recommended because this method will give a more permanent set up for the dog’s containment area. However, to avoid the hassles and mess of burying, above ground installation can be done.

But for those dog owners who are just renting their homes or don’t have tools for digging, the method of buying the wires may not be applicable. Some dog owners don’t just like the idea of burying the wires and are still hesitant in using an underground dog fence system.

We have another great solution in setting up the own underground electric fence dog system. With the use of our Securing Staples, owners can now secure the wires above the ground in creating the boundary for the containment area. This above ground installation is proven to be effective and reliable.

We are certain that dog owners will get the best containment system among our featured electric dog fence systems. We are not only the supplier of dog products but also the online resource that provides answers and solutions to the electric dog fence problems.

 

Step 1:

» First lay out the boundary wire in the desired shape and around the area owners want to contain. From the boundary wire run twisted wire to the transmitter and pug it in.
» Once owners have decide the system owners chose is correct for owners, "Staple" the twisted wire to the ground by hammering in a wire "Staple" every 5 - 6 feet.
» Now stop and look at the wire. Is it completely flush to the ground all the way to the start of the boundary? The wire MUST completely touch the ground. If not go and "Staple" any raised areas before proceeding to the next step.

Step 2:

» Place a "Staple" where the twisted wire and the beginning of the boundary meet (if owners have a splice in this area please dig a small hole about 2 inches deep and bury the splice. Then place a "Staple" in the front of and behind the splice to relieve any pressure on the splice)
» Next, walk to the first corner of the boundary and "Staple" it to the ground. Repeat this step for all corners of the boundary. (Not all yards are square if owners do not have corners on the boundary please select multiple anchor points for the wire)
» Now place staples as needed and make sure to staple any raised areas down until they are completely flush with the ground, for maximum safety for owners and the guests.